Plastic and Rubber Parts of the Automobiles
Plastic and Rubber Parts of the Automobiles Since the beginning of the automotive industry, many changes have been made in automotives. Cars, vans, public transport vehicles […]
Properties of polymers in packaging films
Properties of polymers in packaging films Plastic films with a continuous polymeric thin layer have maximum thickness of 2.0 – 3.0 mm and high […]
Additive masterbatches to improve the physical and mechanical properties of polymer products with recycled raw materials (Part 2)
Additive masterbatches to improve the physical and mechanical properties of polymer products with recycled raw materials (Part 2) Creating compatibility in the mixture of recycled polymers […]
Additive Masterbatch; the best way to improve physical and mechanical properties of polymer products with recycled raw materials (Part 1)
Additive Masterbatch; the best way to improve physical and mechanical properties of polymer products with recycled raw materials (Part 1) As consumption of polymer products grows, […]
An inquiry into the efficacy of polyethylene interlayer adhesive in enhancing adhesion strength
An inquiry into the efficacy of polyethylene interlayer adhesive in enhancing adhesion strength Introduction One of the major issues for companies active in the section of petroleum, […]
Polyethylene Compatibilizer Effects on Adhesion Strength and Interlayer Separation in 3_Layer Polyethylene Coatings
Polyethylene Compatibilizer Effects on Adhesion Strength and Interlayer Separation in 3_Layer Polyethylene Coatings In the qualities of three-layer polyethylene coatings, preventing the coating from […]
Hardness Test for Polymers
Hardness Test for Polymers Introduction Hardness measurement is one of the main and most common tests of mechanical and physical properties of materials. Hardness is defined […]
Effects of Talc on mechanical properties of Polypropylene
Effects of Talc on mechanical properties of Polypropylene Introduction In the recent years, Polypropylene (PP) has found wide applications in different industries, including automotive, interior decoration, […]
The effect of SEBS-g-MA compatibilizer on properties of polymer compounds
The effect of SEBS-g-MA compatibilizer physical and mechanical properties of polymer compounds Styrene-Ethylene-Butylene-Styrene (SEBS) is one type of different types of Styrene thermoplastic elastomers. In chemical […]
The importance of knowing the glass transition temperature
The importance of knowing the glass transition temperature and its measurement methods in polymer products Introduction The glass transition temperature is the temperature at which the […]
Modern composite coatings in repair of oil and gas pipelines
Modern composite coatings in repair of oil and gas pipelines with the capability of use in marine and onshore environments Introduction Nowadays, due to the importance […]
Introduction of TPO, TPV, and TPU Thermoplastic Elastomers
Introduction of TPO, TPV, and TPU Thermoplastic Elastomers Polymers are divided to four categories: thermoplastics, thermoset rubbers, thermosets and thermoplastic elastomers (TPE) which are a group […]
Different Types of Polymer Adhesives
Different Types of Polymer Adhesives Adhesives have been used by humans for a long time, so that today they are an inseparable part of various industries. […]
The effect of POE-g-MA toughening agent on the impact property of PA6/PP compound
The effect of POE-g-MA toughening agent on the impact property of PA6/PP compound Polyamide (nylon) thermoplastic resins are widely used due to a very suitable balance […]
Top 10 Injection Molding Defects (second part)
Top 10 Injection Molding Defects (second part) Injection molding efficiency is more focused on multiple process and machine parameters that dictate the quality of the final […]
Top 10 defects in injection molding (First part)
Top 10 Injection Molding Defects Introduction Despite the numerous advantages of injection molding, there is always the possibility of high-cost defects. These problems in injection molding […]
Different Types of Polymer Adhesives
Different Types of Polymer Adhesives Adhesives have been used by humans for a long time, so that today they are an inseparable part of various industries. […]
Effect of Adding Grafted Polypropylene by Maleic Anhydride on Properties of Polypropylene/Talc Composites
Effect of Adding Grafted Polypropylene by Maleic Anhydride on Properties of Polypropylene/Talc Composites Polypropylene has numerous benefits such as: low cost, suitable mechanical properties, excellent and […]
Effect of Interlayer Adhesive on Three-Layer Coatings
Effect of interlayer adhesive on three-layer coatings Nowadays, polymeric interlayer adhesives such as polyethylene grafted by maleic anhydride, are used widely for linking polyolefins to polar […]
Multilayer Films for Food Packaging (The Manifestation of Interlayer Adhesives)
Multilayer Films for Food Packaging (The Manifestation of Interlayer Adhesives) In the article of properties of different types of polymers at polymer films (part […]
Polyacetal Thermoplastic and its Compounds; Properties and Applications
Polyacetal Thermoplastic and its Compounds; Properties and Applications Today, more than 70% of global POM production capacity is centered in Asia. The production market has been […]
Polycarbonate Properties and Applications
Polycarbonates (PC) are condensation polymers having desirable properties such as high clarity, thermal stability, high heat distortion temperature, and in spite of their hardness, they are […]
Polymer ageing
Polymer ageing Nowadays a combination of different physical, mechanical, and thermal properties is needed in many engineering applications, but it is not possible to use only […]
An Analysis on the Effects of Different Coupling Agents on Polymer Compounds Containing Flame Retardant
An Analysis on the Effects of Different Coupling Agents on Polymer Compounds Containing Flame Retardant As explained in previous articles, compounds containing flame retardant additives are […]
A Comparative Analysis of the Effect of Coupling Agent with Different Grafting Level on Mechanical Properties of HFFR Compounds
A Comparative Analysis of the Effect of Coupling Agent with Different Grafting Level on Mechanical Properties of HFFR Compounds Polymers containing the flame-retardant substance are […]
An Analysis on The Effect Of LLDPE-G-MA as a Compatibilizer In Halogen-Free Flame Retardants (HFFR) Compounds
An Analysis on The Effect Of LLDPE-G-MA as a Compatibilizer In Halogen-Free Flame Retardants (HFFR) Compounds One of the most important features of high-consumption polymers such […]
The Effects of Reactive Impact Modifier on Impact Resistance of Polycarbonate
The Effects of Reactive Impact Modifier on Impact Resistance of Polycarbonate As an engineering polymer, polycarbonate (PC) is the hardest transparent material used in a wide […]
Polymer Fibers (Part 3 (Final): Methods of Producing Polymer Fibers)
Polymer Fibers (Part 3 (Final): Methods of Producing Polymer Fibers) In the first part of the series, we got acquainted with ordinary polymer fibers; then, in […]
Polymer Fibers (Part 2: High performance Fibers)
In prat 1, we examined the most important and most used polymer fibers, namely polyolefin, polyamide, vinyl, acrylic and polyester fibers. In addition to those items, […]
Polymer Fibers (Part 1: Introduction and Common Fibers)
Polymer Fibers (Part 1: Introduction and Common Fibers) Introduction Fibers are part of our daily lives. Reflecting on their surroundings can understand their full impact on […]
Blow Molding (Part 2/ Suitable Plastics, The Advantages and Disadvantages)
Blow Molding (Part 2/Suitable Plastics, The Advantages and Disadvantages) Introduction In the first part of the article Blow Molding and its types of processes were introduced. […]Blow Molding (Part 1/Various Processes)
Blow Molding (Part 1/Various Processes) Introduction Blow molding is one of the most economical and fastest processes of manufacturing plastic products used to produce various types […]
Optimized compatibilizer in glass fiber filled-polypropylene compounds (PP/GF): SEBS-g-MA, POE-g-MA or PP-g-MA?
Optimized compatibilizer in glass fiber filled-polypropylene compounds (PP/GF): SEBS-g-MA, POE-g-MA or PP-g-MA? Using compatibilizers is a common approach to intensify the effect of reinforcing fillers such […]
The Solution for Compatibility in Multilayer Packaging Films; Tie Layer Adhesives
Multilayer films with a special structure based on Fig.1 have been used in food packaging recently. These films are designed to protect food for a long […]
PVC in Wire and Cable Industry
Nowadays, the polymer industry has entered in all technical and engineering fields such as electronic industry, widely. There are many kinds of conductive, non-conductive, and insulator […]
Nanotechnology and The Environment
Nano-technology like other kinds of technologies makes incredible changes in human life. The environment is one of the most important aspects of life that is considerable […]
An Oil-free Future, Plant-based Polymer
Currently, polymers have engaged a special spot in different industries and replaced conventional materials and resources. According to the limitation of oil resources and growing the […]
Property Improvement of Recycling Materials via Polyolefin Coupling Agents
Nowadays, plastics are engaged to produce a vast numbers of productions such as different dishes, garbage bags, adolescent and toddler toys, different bottles and many more. […]
